Reinvent Your StoreDownload LightSpeed Pro

Lightspeed OnSite Demo

Test drive Lightspeed OnSite 2015 for 30 days.

The Lightspeed OnSite Demo database is fully enabled for 5 users. The Lightspeed OnSite Demo is identical to the licensed version, however, the Company Setup panel, Users Setup Panel, and PDF Print Background Setup Panel for the example company 'Space' cannot be modified.

mac

Lightspeed OnSite 2015 for Licensed Users

Upgrade requires a Maintenance Plan valid on October 1, 2014

Upgrade Instructions

  1. 1

    If you are running Lightspeed OnSite 3.7 or higher, the installer will backup Lightspeed OnSite for you when you run the upgrade.

    If you are running Lightspeed OnSite 3.5–3.6.8, perform a manual backup of Lightspeed OnSite at Tools > Utilities > Backup Database.

  2. 2

    Log out all users

  3. 3

    Open the installer and double-click the Lightspeed OnSite Server icon. Double-click the Install Lightspeed OnSite Server icon. Follow the on-screen steps in the installer window.

  4. 4

    When the installer has completed, launch the Lightspeed OnSite application and log in as you normally would.

Note for users upgrading from 3.7.6 or lower: Due to technology changes, Smart Finds and Trackers cannot be migrated during the upgrade process. Your Smart Finds and Trackers have been exported and you can re-create them by following this video.

Upgrade to Lightspeed OnSite 2015
SHA1 Checksum 09597973f166dfbad3da5fed6908d57b829c7ac0
Download Lightspeed OnSite 2015 Client
SHA1 Checksum f11945b7eb0d6a880e840cbf9fe5eb6fc1b71501

Release Notes
Watch a video outlining the Upgrade Process

Web Store

This POS software download is for new Lightspeed Onsite Web Store customers that want to use a hosting provider other than Lightspeed to host their Web Store.

Important: For existing customers, Web Store 3.0.1 or later is upgraded automatically via the Web Store Admin Panel. If running Web Store 3.0 or earlier, upgrade Web Store as detailed here. If your Web Store is hosted with Lightspeed, contact our Support team for install/upgrade instructions.

Installation Instructions

  1. 1

    Download the install.zip file using the green button on the right.

  2. 2

    Unzip the file and extract install.php.
    Note: Depending on your browser settings, the file might extract automatically.

  3. 3

    Upload install.php to your web server where you will install web store.

  4. 4

    Using a browser, use your URL and add /install.php to the end,
    such as http://www.mystore.com/install.php to begin the installation process.

For detailed instructions and technical requirements,
please see Installing Lightspeed Web Store.

Archives

Lightspeed OnSite 3.9.8 for Licensed Users

Upgrade requires a Maintenance Plan valid on August 1, 2013

Upgrade Instructions

  1. 1

    If you are running Lightspeed OnSite 3.7 or higher, the installer will backup Lightspeed OnSite for you when you run the upgrade.

    If you are running Lightspeed OnSite 3.5–3.6.8, perform a manual backup of Lightspeed OnSite at Tools > Utilities > Backup Database.

  2. 2

    Log out all users

  3. 3

    Open the installer and double-click the Lightspeed OnSite Server icon. Double-click the Install Lightspeed OnSite Server icon. Follow the on-screen steps in the installer window.

  4. 4

    When the installer has completed, launch the Lightspeed OnSite application and log in as you normally would.

Note for users upgrading from 3.7.6 or lower: Due to technology changes, Smart Finds and Trackers cannot be migrated during the upgrade process. Your Smart Finds and Trackers have been exported and you can re-create them by following this video.

Upgrade to Lightspeed OnSite 3.9.8
SHA1 Checksum 9447866208a43c011f6547c58f39d5fa2348a65e
Download Lightspeed OnSite 3.9.8 Client
SHA1 Checksum 6967e671377e5a4496f60912a6afcd3552bab9e7

Release Notes
Watch a video outlining the Upgrade Process

Lightspeed OnSite 3.9.4 for Licensed Users

Upgrade requires a Maintenance Plan valid on August 1, 2013

Upgrade Instructions

  1. 1

    If you are running Lightspeed OnSite 3.7 or higher, the installer will backup Lightspeed OnSite for you when you run the upgrade.

    If you are running Lightspeed OnSite 3.5–3.6.8, perform a manual backup of Lightspeed OnSite at Tools > Utilities > Backup Database.

  2. 2

    Log out all users

  3. 3

    Open the installer and double-click the Lightspeed OnSite Server icon. Double-click the Install Lightspeed OnSite Server icon. Follow the on-screen steps in the installer window.

  4. 4

    When the installer has completed, launch the Lightspeed OnSite application and log in as you normally would.

On each computer logging into Lightspeed, log into Lightspeed as your normally would. The Auto Updater will automatically download the latest version of Lightspeed and replace your existing version, as well as update the shortcut if Lightspeed is in your dock.


Web Store 2.5

Upgrade Instructions

  1. 1

    Perform a manual backup of Lightspeed at Tools > Utilities > Backup Database. Log out all Users.

  2. 2

    Click Upgrade to Lightspeed 3.7.6 and download the installer .dmg to the hard drive of your Lightspeed server.

  3. 3

    Double-click the Install Lightspeed Server icon. Follow the on-screen steps in the installer window. Do not restart your Mac when the installer completes. Instead, navigate to System Preferences > Lightspeed Server and wait until the status of your Lightspeed Server says "Running" before attempting to log in.

  4. 4

    Lightspeed and log in as you normally would. On each computer logging into Lightspeed, log into Lightspeed as your normally would. The Auto Updater will automatically download the latest version of Lightspeed and replace your existing version, as well as update the shortcut if Lightspeed is in your dock.

On each computer logging into Lightspeed, log into Lightspeed as your normally would. The Auto Updater will automatically download the latest version of Lightspeed and replace your existing version, as well as update the shortcut if Lightspeed is in your dock.


Lightspeed 3.8.1 for Licensed Users

Upgrade requires a Maintenance Plan valid on April 1, 2013

Upgrade Instructions

  1. 1

    If you are running Lightspeed OnSite 3.7 or higher, the installer will backup Lightspeed OnSite for you when you run the upgrade.

    If you are running Lightspeed OnSite 3.5–3.6.8, perform a manual backup of Lightspeed OnSite at Tools > Utilities > Backup Database.

  2. 2

    Log out all users

  3. 3

    Open the installer and double-click the Lightspeed OnSite Server icon. Double-click the Install Lightspeed OnSite Server icon. Follow the on-screen steps in the installer window.

  4. 4

    When the installer has completed, launch the Lightspeed OnSite application and log in as you normally would.

    Note: Due to technology changes in Lightspeed OnSite 3.8.1, Smart Finds and Trackers cannot be migrated during the upgrade process. Your Smart Finds and Trackers have been exported and you can re-create them by following this video

On each computer logging into Lightspeed, log into Lightspeed as your normally would. The Auto Updater will automatically download the latest version of Lightspeed and replace your existing version, as well as update the shortcut if Lightspeed is in your dock.


Lightspeed 3.7.6 for Licensed Users

Upgrade requires a Maintenance Plan valid on October 1st, 2012

Upgrade Instructions

  1. 1

    Perform a manual backup of Lightspeed at Tools > Utilities > Backup Database. Log out all Users.

  2. 2

    Click Upgrade to Lightspeed 3.7.6 and download the installer .dmg to the hard drive of your Lightspeed server.

  3. 3

    Double-click the Install Lightspeed Server icon. Follow the on-screen steps in the installer window. Do not restart your Mac when the installer completes. Instead, navigate to System Preferences > Lightspeed Server and wait until the status of your Lightspeed Server says "Running" before attempting to log in.

  4. 4

    Lightspeed and log in as you normally would. On each computer logging into Lightspeed, log into Lightspeed as your normally would. The Auto Updater will automatically download the latest version of Lightspeed and replace your existing version, as well as update the shortcut if Lightspeed is in your dock.

On each computer logging into Lightspeed, log into Lightspeed as your normally would. The Auto Updater will automatically download the latest version of Lightspeed and replace your existing version, as well as update the shortcut if Lightspeed is in your dock.


Lightspeed 3.6.8 for Licensed Users

Upgrade requires a Maintenance Plan valid on November 1st, 2011

Upgrade Instructions

  1. 1

    Perform a manual backup of Lightspeed at Tools > Utilities > Backup Database. Log out all Users.

  2. 2

    Click Upgrade to Lightspeed 3.6.8 and download the installer .dmg to the hard drive of your Lightspeed server.

  3. 3

    Open the installer and drag the Lightspeed application to your Applications folder.

  4. 4

    Double-click the Install Lightspeed Server icon. Follow the on-screen steps in the installer window. Restart your Mac when prompted to do so.

  5. 5

    Launch Lightspeed and log in as you normally would.

On each computer logging into Lightspeed, log into Lightspeed as your normally would. The Auto Updater will automatically download the latest version of Lightspeed and replace your existing version, as well as update the shortcut if Lightspeed is in your dock.


Lightspeed 3.5.6 for Licensed Users

Upgrade requires a Maintenance Plan valid on July 1st, 2011

Upgrade Instructions

  1. 1

    Perform a manual backup of Lightspeed at Tools > Utilities > Backup Database. Log out all Users.

  2. 2

    Click Upgrade to Lightspeed 3.5.6 and download the installer .dmg to the hard drive of your Lightspeed server.

  3. 3

    Double-click the Install Lightspeed Server icon. Follow the onscreen steps, and then restart.

  4. 4

    Launch Lightspeed and log in as you normally would.

On each computer logging into Lightspeed, log into Lightspeed as your normally would. The Auto Updater will automatically download the latest version of Lightspeed and replace your existing version, as well as update the shortcut if Lightspeed is in your dock.


Lightspeed 3.4.5 for Licensed Users

Upgrade requires a Maintenance Plan valid on October 1st, 2009

Upgrade Instructions

  1. 1

    Perform a manual backup of Lightspeed at Tools > Utilities > Backup Database. Log out all Users.

  2. 2

    Click Upgrade to Lightspeed 3.4.5 and download the installer .dmg to the hard drive of your Lightspeed server.

  3. 3

    Open the installer and drag the Lightspeed application to your Applications folder.

  4. 4

    Double-click the Install Lightspeed Server icon. Follow the onscreen steps, and then restart.

  5. 5

    Launch Lightspeed and log in as you normally would.

On each computer logging into Lightspeed, log into Lightspeed as your normally would. The Auto Updater will automatically download the latest version of Lightspeed and replace your existing version, as well as update the shortcut if Lightspeed is in your dock.


Lightspeed 2.9.2 for Licensed Users

Lightspeed 2.9.2 features support for Apple's Fall 2009 GSX Web Services API changes, that affect Apple Resellers.

Upgrading to Lightspeed 2.8 or higher requires a Maintenance Plan valid on February 1st, 2009. Lightspeed 2.9.2 requires you to run the Lightspeed 2.9 Server Update on your server prior to upgrading if upgrading from Lightspeed 2.8 and below. See below for upgrade instructions.


Lightspeed 2.9 Server Update

 

The Lightspeed 2.9 Server Update will install OpenBase 11.0.3 and all of the Lightspeed server extensions for iPhone Stats, credit card processing, and more.

For customers using other applications on their Lightspeed server computer that require OpenBase, please contact those software vendors regarding compatibility with OpenBase 11 prior to installing this update.

Please note that older versions of Daylite (3.7.5.x or 3.8.1) will not operate if this upgrade is installed, as they are not compatible with OpenBase 11. Daylite 3.9 includes compatibility for OpenBase 11.

Installation Instructions:

  1. 1

    Perform a backup of your Lightspeed database under Tools -> Utilities -> Backup Database.

  2. 2

    Ensure that all users are logged out of Lightspeed and that the Lightspeed server can access the Internet.

  3. 3

    Download and install the Lightspeed 2.9 Server Update on the Lightspeed server computer.

  4. 4

    Download Lightspeed 2.9 onto the Lightspeed server from the 'Lightspeed 2.9 for Licensed Users' section above, and log in to update your database.

  5. 5

    Download Lightspeed 2.9 from the same section above on all workstation computers and remove any previous versions of Lightspeed.


Purchase Lightspeed Maintenance Plan

icon

PURCHASE OR RENEW DIRECT

Email: sales@lightspeedpos.com
Toll-free: 866-932-1801
International: 514-907-1801

icon

FIND A RESELLER

With 300+ Lightspeed Resellers
globally, you're sure to find local
Lightspeed expert in your area.

icon

PURCHASE OR RENEW ONLINE

Online promotions, Lightspeed
bundles, components and more.

Seeing is believing. Try Lightspeed in your store today.

Attend a Live Walkthrough > Request a Quote >